What is the E-IPS and AS-IPS screen

By -
Sometimes you will see these terms being used, but S-IPS is still widely used as an umbrella for modern IPS panels. In 2002 Advanced Super IPS (AS-IPS) boosted the amount of light transmitted from the backlighting by around 30% compared with the standard Super IPS technology developed in 1998. This did help boost contrast ratios somewhat, but they could still not compete with VA panel types. In 2005 with the introduction of RTC technologies (Overdrive Circuitry - ODC) and dynamic contrast ratios, LG.Display started to produce their so called "Enhanced IPS" (E-IPS, not to be confused with e-IPS) panels. Pixel response times were reduced across G2G transitions to as low as 5ms on paper.

Enhanced S-IPS builds on S-IPS technology by providing the same 178° viewing angle from above and below and to the sides, and greatly improves the off-axis viewing experience by delivering crisp images with minimal colour shift, even when viewed from off-axis angles such as 45°. You will rarely see this E-IPS term being used to be honest. You may also occasionally see the name "Advanced S-IPS" (AS-IPS) being used, but this was just a name given specifically by NEC to the E-IPS panel developed and used in their very popular NEC 20WGX2 screen, released in 2006. The AS-IPS name was also (confusingly) used by Hitachi in some of their earlier IPS generations as shown below, back in 2002.

Above: Evolution of IPS as detailed by Hitachi Displays: "IPS technology was unveiled by Hitachi, Ltd. in 1995, and put to practical use in 1996. Since then, it has evolved into Super-IPS, Advanced-Super IPS, and IPS-Pro."

Comments

Post a Comment

Popular posts from this blog

How to Open and Disassemble a Mobile Cell Phone？

By -
Image
How to open and disassemble any mobile cell phone including Nokia, Samsung, Motorola, China Mobile Phones or any other brand of cell phone from any mobile cell phone manufacturer is basically same with slight change in the process. Before proceeding to open and disassemble a mobile cell phone, make sure you have all the required tools for mobile repairing . The tools you will need are: 1.      T5, T6 and Forehead Precision Screwdriver . A screwdriver set or kit can be very useful. These screwdrivers must have magnetic tip. 2.      Mobil Phone Opener 3.      Tweezers 4.      Antistatic Wrist Strap 5.      Antistatic Hand Gloves 6.      Antistatic or ESD-Safe Mat 7.      ESD-Safe Apron 8.      ESD-Safe Footwear NOTE : It is very important to use only Antistatic or ESD-Safe tools to open and disassemble a mobile cell phone because parts inside a mobile phone are very sensitive to static electricity and can get damaged if precaution is not taken
Read more

What's the difference of IPS, OLED & LTPS?

By Chad -
Image
Now so many mobile phone screen technology, I'd like to introduce various display panel and screen technology, to make everybody can distinguish them easily. At present there are only two mobile phone screen classification, TFT - LCD and OLED, They respectively represent the passive and active display screen.Passive panel need the support of the back light, Active panel can self-illuminate and need no back light. OLED mainly represented by Samsung Super AMOLED（Super Active Matrix Organic Light Emitting Diode. TFT-LCD include: TN、VA、IPS、CPA（AVS） TN(Twisted Nematic)-- Low-cost make it is one of the most widely used screen. but the disadvantage is that small visual Angle, color reduction ability is limited VA(Vertical Alignment)-- It doesn't suitable for touch panel of mobile phone because it will have ripple of pressing. IPS(In-Plane Switching)-- With advantages of wide visual angle and good performance of color reduction. CPA(Continuous Pinwheel Alignment)--
Read more

How do a touch screen works?

By Chad -
Image
I recently overheard a woman on the subway telling her friend that her toddler “swipes” everything in their house – the coffee table, books, plates and even her own mother, trying to make her disappear like an image on a touch screen. The story got me thinking that for many of us, our knowledge of what’s going on behind that glossy display isn’t much more than a toddler’s. Before I started researching how touch screens worked, I figured there was one universal technology behind the “swipable” phenomenon. Instead it turns out there are half a dozen, and more being researched every day. The two most commonly used systems are resistive and capacitive touch screens. For the sake of simplicity, I will focus here on these two systems and finish with where experts think touch screen technology is headed. 1. Resistive These are the most basic and common touch screens, the ones used at ATMs and supermarkets, that require an electronic signature with that small grey pen. These screens lite
Read more